OpenFOAM-5.x

History

Henry 61bcea321b Add simulationType entry even for simpleFoam cases so that generic utilities like yPlus select the appropriate turbulence model		2015-01-21 21:08:19 +00:00
..
0	Add the OpenFOAM source tree	2014-12-10 22:40:10 +00:00
constant	Add simulationType entry even for simpleFoam cases	2015-01-21 21:08:19 +00:00
system	Updated the whole of OpenFOAM to use the new templated TurbulenceModels library	2015-01-21 19:21:39 +00:00
Allclean	Minor change to comment	2014-12-14 21:50:14 +00:00
Allrun	Minor change to comment	2014-12-14 21:50:14 +00:00
Allrun.pre	Minor change to comment	2014-12-14 21:50:14 +00:00
README.txt	Add the OpenFOAM source tree	2014-12-10 22:40:10 +00:00

README.txt

2013-10-01 Meshing the angledDuct geometry.

constant/triSurface/angledDuct.stl
    outer geometry

constant/triSurface/boundaryAndFaceZones.stl
    boundary and faceZones to extract feature
    edges from.

    (in angledDuctImplicit:
        setSet:
            cellSet porosity new zoneToCell porosity
            cellSet other new cellToCell porosity
            cellSet other invert
            faceSet porosityFaces new cellToFace other all
            faceSet porosityFaces subset cellToFace porosity all
            faceZoneSet porosityFaces new setToFaceZone porosityFaces

        surfaceMeshTriangulate -faceZones '(porosityFaces)' boundaryAndFaceZones.stl
    )

surfaceFeatureExtract



constant/triSurface/porosity_inflated.stl
    block around porosity
    (slightly inflated)

Done paraview:
- start off from porosity.stl
- rotate to align with x axis and translate so symmetric in y:
    Filter->transform
    - translate (0 -0.025 0)
    - rotate (0 0 -45)
- inflate y and z:
    Filter->transform
    - scale (1 1.5 1.5)
- translate back:
    Filter->transform
    - translate (0 0.025 0)
- rotate back:
    Filter->transform
    - rotate (0 0 45)