research/OpenFOAM-4.x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
521 commits 11 branches 2 tags 77 MiB
Commit graph

316 commits

Author SHA1 Message Date
Henry
372dc26c8d int32: Add IO operators for long on 32bit OS 
On 32bit OSs long is not unambiguously int32_t (or int64_t) causing
problems for IO operator resolution.  This problem is avoided by
explicitly defining the following operators:
 2015-05-16 15:29:34 +01:00
Henry
7b2451f925 ReversibleReaction: Protect against /0 2015-05-14 18:51:26 +01:00
Henry
4c51cba64a externalWallHeatFluxTemperature: Correct docs 
Resolved part of bug-report http://www.openfoam.org/mantisbt/view.php?id=1690
 2015-05-14 18:50:47 +01:00
Henry
18705e2a77 chemistryModel: Improve efficiency of reversible reaction-rate evaluation 2015-05-14 18:49:18 +01:00
Henry
a25b0978a6 printStack, ptscotchDecomp: Correct integer type used to hold memory addresses 2015-05-14 18:48:35 +01:00
Henry
b6ebf4bdaa Update header 2015-05-10 12:33:33 +01:00
Henry
5acc3dbdd5 chemistryModel: Added optional Treact to reduce the time of chemistry evaluation 
Treact: Temperature below which the reaction rates are assumed 0
 2015-05-10 12:31:17 +01:00
Henry
bfb726aba3 twoPhaseEulerFoam: rationalize handling of fixed-flux BC update 2015-05-09 23:45:15 +01:00
Henry
c9d9ba0b6c surfaceFilmModels: Replaced removeInjection with patchInjection 
patchInjection accumulates mass exchanges on a per-patch basis which are
reported by injectionModelList
 2015-05-08 16:40:03 +01:00
Henry
e1d88f18bd Update header 2015-05-05 15:46:52 +01:00
Henry
08cc46689b Correct comment 2015-05-05 15:46:38 +01:00
Henry
8dee55bc99 fieldMinMax: add optional switch to control the output of max/min location 
and simplify output format for graphing

With "location yes;"

log:
    fieldMinMax fieldMinMax output:
        min/max(mag(U.air)) = 0 28.309442
        min/max(mag(U.water)) = 0 27.221734

file:
    # Field minima and maxima
    # Time          min(U.air)      max(U.air)      min(U.water)    max(U.water)
    4.00061050e-01  0.00000000e+00  2.87015987e+01  0.00000000e+00  2.71025731e+01
    4.00134265e-01  0.00000000e+00  2.86505310e+01  0.00000000e+00  2.71134246e+01
    4.00222098e-01  0.00000000e+00  2.85937449e+01  0.00000000e+00  2.71255302e+01

With "location no;"

log:
    fieldMinMax fieldMinMax output:
        min(mag(U.air)) = 0 at location (-0.058373423 -0.15376628 0.021017389)
        max(mag(U.air)) = 28.701599 at location (-0.24002836 0.0053456235 3.8964638)
        min(mag(U.water)) = 0 at location (-0.058373423 -0.15376628 0.021017389)
        max(mag(U.water)) = 27.102573 at location (-0.24002836 0.0053456235 3.8964638)

file:
    # Field minima and maxima
    # Time          field           min             location(min)   max             location(max)
    4.00061050e-01  U.air           0.00000000e+00  (-5.83734226e-02 -1.53766281e-01 2.10173892e-02)        2.87015987e+01  (-2.40028359e-01 5.34562354e-03 3.89646377e+00)
    4.00061050e-01  U.water         0.00000000e+00  (-5.83734226e-02 -1.53766281e-01 2.10173892e-02)        2.71025731e+01  (-2.40028359e-01 5.34562354e-03 3.89646377e+00)
 2015-05-05 15:41:32 +01:00
Henry
05cd20d826 probes: Improved formatting of header to make it easier to parse and read probe locations 
New layout:

    # Probe 0 (0.0254 0.0253 0)
    # Probe 1 (0.0508 0.0253 0)
    # Probe 2 (0.0762 0.0253 0)
    #       Probe             0             1             2
    #        Time
            1e-05        142974        128861        115934
            2e-05      -69444.1        -62541      -56395.7
            3e-05      -1546.81      -1445.94      -1154.79
 2015-05-05 12:26:28 +01:00
Henry
57b25f22b3 planeExtrusion.[HC]: Renamed from plane.[HC] to avoid name clash 2015-05-04 21:16:44 +01:00
Henry
c28730251c extrudeMesh: Add sector extrusion type and specialize wedge and plane 
to create single layer extrusions with wedge and empty front and back
patches respectively.
 2015-05-04 20:54:39 +01:00
Henry
14fe8ad7e2 polyTopoChange: Corrected layout for Doxygen 2015-05-04 16:37:20 +01:00
Henry
767e1a4e69 GAMG solver: Set the following defaults: 
cacheAgglomeration true;
    agglomerator    faceAreaPair;
    nCellsInCoarsestLevel 10;
    mergeLevels     1;
 2015-05-03 18:11:25 +01:00
Henry
b06c078607 sampledSets, sampledSurfaces: Provide warning message if field cannot be found 
Generate fatal error if iso-surface field cannot be found
 2015-05-03 16:52:37 +01:00
Henry
e558e900ef pimpleControl: Support field relaxation when the number of PIMPLE iterations = 1 
This allows PIMPLE solvers to operate in SIMPLE mode
 2015-05-03 11:50:05 +01:00
Henry
48edc421a8 steadyStateDdtScheme: Corrected dimensions of ddtCorr for compressible flow 2015-05-02 17:38:29 +01:00
Henry
df3e05beb9 BrownianMotionForce: Updated interface to turbulence model 2015-04-30 17:38:12 +01:00
Henry
cb1f94a370 DispersionRASModel: Updated lookup of the turbulence model 
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1679
 2015-04-30 11:11:35 +01:00
Henry
c43b145479 patchInteractionDataList: Ignore empty patches 2015-04-29 23:06:09 +01:00
Henry
e5a52c90e8 Update headers 2015-04-29 14:44:53 +01:00
Henry
3e2b64c08d MULES: nLimiterIter and smoothLimiter are now user-input via the corresponding fvSolution sub-dict 
nLimiterIter: Number of iterations during limiter construction
    3 (default) is sufficient for 3D simulations with a Courant number 0.5 or so
    For larger Courant numbers larger values may be needed but this is
    only relevant for IMULES and CMULES

smoothLimiter: Coefficient to smooth the limiter to avoid "diamond"
    staggering patters seen in regions of low particle phase-fraction in
    fluidised-bed simulations.

    The default is 0 as it is not needed for all simulations.
    A value of 0.1 is appropriate for fluidised-bed simulations.
    The useful range is 0 -> 0.5.
    Values larger than 0.5 may cause excessive smearing of the solution.
 2015-04-29 14:37:41 +01:00
Henry
080074a7b4 sixDoFRigidBodyMotion: Apply accelerationDamping to the acceleration only 
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1675
 2015-04-28 14:58:14 +01:00
Henry
5aa15a3924 Update header 2015-04-27 20:23:11 +01:00
Henry
9fb9a65952 surfaceNormalFixedValueFvPatchVectorField: Update fixedValue field to handle mesh-motion 
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1667
 2015-04-27 20:22:01 +01:00
Henry
5276cc1d39 PrandtlDelta: Added description 
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1673
 2015-04-27 16:13:20 +01:00
Henry
4916a13d7e patchInteractionDataList: Remove default patch interaction method 
Now interaction methods must be specified for all non-coupled patches.
If this approach proves irritating a warning rather than an error could
be generated.
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1670
 2015-04-27 12:00:27 +01:00
Henry
65152a3109 AMIMethod: Corrected type of tgtPatch_ 
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1669
 2015-04-27 11:10:15 +01:00
Henry
d542ea93d5 Updated header 2015-04-26 21:38:29 +01:00
Henry
7d9dc9035e cellSource: Writing the volume of the cellSource (sum(V)) for each time is now optional 
Previous behavior which may be useful for moving-mesh cases can be
selected using the optional entry:
    writeVolume  yes;

The initial volume is written in the log and data file header e.g.:

 #   Source : all
 #   Cells  : 3829
 #   Volume : 9.943164e-01

Also added
    sumMag        | sum of component magnitudes
 2015-04-26 21:35:25 +01:00
Henry
c4f9e88f20 Updated header 2015-04-26 21:35:09 +01:00
Henry
440e1e0eee faceSource: Changed option to write faceSource area to 'writeArea' 2015-04-26 21:34:27 +01:00
Henry
6e385b237a Update headers 2015-04-26 16:38:47 +01:00
Henry
7047154fee MRFZone: Add regex and group support to the specification of nonRotatingPatches 2015-04-26 16:38:07 +01:00
Henry
8bec8510fa Update headers 2015-04-26 16:37:43 +01:00
Henry
db4ac98fd8 faceSource: Writing the total area of the faceSource (sum(magSf)) for each time is now optional 
Previous behavior which may be useful for moving-mesh cases can be
selected using the optional entry:
    writeTotalArea  yes;

The initial total area is written in the log and data file header e.g.:

 #   Source : faceZone f0
 #   Faces  : 8
 #   Area   : 1.063860e-02
 2015-04-26 16:32:19 +01:00
Henry
2e9a3903cd SRFModel: Changes origin to be user-input rather than hard-coded to (0 0 0) 
Updated tutorials
 2015-04-26 11:28:14 +01:00
Henry
0fe1967c22 includeEtcEntry: New dictionary include directive: #includeEtc "etcFile" 
Description
    Specify an etc file to include when reading dictionaries, expects a
    single string to follow.

    Searches for files from user/group/shipped directories.
    The search scheme allows for version-specific and
    version-independent files using the following hierarchy:
    - \b user settings:
      - ~/.OpenFOAM/\<VERSION\>
      - ~/.OpenFOAM/
    - \b group (site) settings (when $WM_PROJECT_SITE is set):
      - $WM_PROJECT_SITE/\<VERSION\>
      - $WM_PROJECT_SITE
    - \b group (site) settings (when $WM_PROJECT_SITE is not set):
      - $WM_PROJECT_INST_DIR/site/\<VERSION\>
      - $WM_PROJECT_INST_DIR/site/
    - \b other (shipped) settings:
      - $WM_PROJECT_DIR/etc/

    An example of the \c \#includeEtc directive:
    \verbatim
        #includeEtc "etcFile"
    \endverbatim

    The usual expansion of environment variables and other constructs is
    retained.
 2015-04-26 10:44:11 +01:00
Henry
091b6bc857 codedFunctionObject: Add meshTools library to include and link line 2015-04-25 21:57:40 +01:00
Henry
2a7c6c18e3 potentialFoam: No longer executes functionObjects by default 
Use the new -withFunctionObjects command-line option to execute functionObjects
 2015-04-25 21:56:14 +01:00
Henry
992195c6bc Pe: Create and write volScalarField in addition to the surfaceScalarField for ease of post-processing 
Update handling of turbulence models
 2015-04-25 16:29:54 +01:00
Henry
c7e807cf74 timeSelector: Rename option zeroTime -> withZero for consistency with the noZero option 2015-04-25 15:12:08 +01:00
Henry
cb82ae7d96 timeSelector: Change select0 to return 'constant' if no times are specified or available 
This allows checkMesh and other mesh manipulation utilities to operate
on the mesh without any time directories being present.
 2015-04-25 11:51:06 +01:00
Henry
53b1b5c6df GradientDispersionRAS: Updated to use the new GaussNormal function 
Provided by Timo Niemi
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1650
 2015-04-20 17:48:16 +01:00
Henry
64c3aa3764 lagrangian/basic/particle/particleI.H: General clean-up 2015-04-20 17:47:56 +01:00
Henry
d4f6e184be prghPressureFvPatchScalarField: Add support for hRef 2015-04-18 19:31:31 +01:00
Henry
bb59286bb6 LESfilter: Allow the name of the filter sub-dict to be specified by New 
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1659
 2015-04-18 19:30:27 +01:00